Lesson: Levelling-
description of level instruments
The art of determining relative altitudes
of points on the surface of the earth of beneath the surface of earth is called
LEVELLING.
of points on the surface of the earth of beneath the surface of earth is called
LEVELLING.
For execution of Engineering Projects it
is very necessary to determine elevations of different points along the
alignment of proposed project.
is very necessary to determine elevations of different points along the
alignment of proposed project.
Other applications are :
i) Taking rail levels
existing before track renewals to finalise final rail level profile including
vertical curves.
ii) Initial ground levels for
earthwork calculations.
iii) Levels for measurement
of earthwork.
iv) Measurement of ballast
etc.
i) Taking rail levels
existing before track renewals to finalise final rail level profile including
vertical curves.
ii) Initial ground levels for
earthwork calculations.
iii) Levels for measurement
of earthwork.
iv) Measurement of ballast
etc.
Terms used in Levelling –
a) DATUM – or Datum plane is
an arbitrarily assumed level surface or line with reference to which level of
other line or surface are calculated.
a) DATUM – or Datum plane is
an arbitrarily assumed level surface or line with reference to which level of
other line or surface are calculated.
b) REDUCED LEVEL (RL) – Height or depth of
a point above or below the assumed datum is called Reduced level.
c) BENCH MARK – (BM) – B.M.
is a fixed reference point of known elevation. It may be of the following
types.
a point above or below the assumed datum is called Reduced level.
c) BENCH MARK – (BM) – B.M.
is a fixed reference point of known elevation. It may be of the following
types.
i) GTS Bench mark (Geodetic Triangulation
Survey) :
These Bench marks are
established by national agency like Survey of India. They are established
with highest precision. Their position and elevation above MSL is given
in a special catalogue known as GTS Maps ( 100 km. interval).
Survey) :
These Bench marks are
established by national agency like Survey of India. They are established
with highest precision. Their position and elevation above MSL is given
in a special catalogue known as GTS Maps ( 100 km. interval).
ii) Permanent Bench Mark : They are
fixed points of reference establish with reference to GTS Bench mark (10 km.
interval).
iii) Arbitrary Bench mark :
These are reference points whose elevations are arbitrarily assumed. In
most of Engineering projects, the difference in elevation is more important
than their reduced levels with reference to MSL as given in a special catalogue
known as GTS Maps ( 100 Km. interval).
fixed points of reference establish with reference to GTS Bench mark (10 km.
interval).
iii) Arbitrary Bench mark :
These are reference points whose elevations are arbitrarily assumed. In
most of Engineering projects, the difference in elevation is more important
than their reduced levels with reference to MSL as given in a special catalogue
known as GTS Maps ( 100 Km. interval).
d) Mean Sea Level (M.S.L.) : M.S.L.
is obtained by making hourly observations of the tides at any place over a
period of 19 years. MSL adopted by Survey of India is now Bombay which
was Karachi earlier. e) Level Surface : The
surface which is parallel to the mean sphereoidal surface of the earth is known
as level surface. f) Line of Collimation
: It is the line joining the intersection of the cross hair and the
optical center of the objective and its extensions, it is also called line of
sight or collimation.
is obtained by making hourly observations of the tides at any place over a
period of 19 years. MSL adopted by Survey of India is now Bombay which
was Karachi earlier. e) Level Surface : The
surface which is parallel to the mean sphereoidal surface of the earth is known
as level surface. f) Line of Collimation
: It is the line joining the intersection of the cross hair and the
optical center of the objective and its extensions, it is also called line of
sight or collimation.
g) Height of Instrument (HI) : The
elevation of the line of sight with respect to assumed datum is known as height
of Instrument(HI). h) Back sight : (B.S.)
– The first sight taken on a levelling staff held at a point of known
elevation. B.S. enables the surveyor to obtain HI +sight i.e. Height of
Instrument or line of sight.
i) Fore Sight : (F.S.)
– It is the last staff reading taken from a setting of the level. It is
also termed as minus sight.
Fore sight is the sight taken
on a levelling staff held at a point of unknown elevation to ascertain the
amount by which the point is above or below the line of sight. This is
also called minus sight as the foresight reading is always subtracted from
height of Instrument.
elevation of the line of sight with respect to assumed datum is known as height
of Instrument(HI). h) Back sight : (B.S.)
– The first sight taken on a levelling staff held at a point of known
elevation. B.S. enables the surveyor to obtain HI +sight i.e. Height of
Instrument or line of sight.
i) Fore Sight : (F.S.)
– It is the last staff reading taken from a setting of the level. It is
also termed as minus sight.
Fore sight is the sight taken
on a levelling staff held at a point of unknown elevation to ascertain the
amount by which the point is above or below the line of sight. This is
also called minus sight as the foresight reading is always subtracted from
height of Instrument.
j) Change Point (CP) : The point on which
both the foresight and back sight are taken during the operation of levelling
is called change point. k) Intermediate Sight (IS) :
The foresight taken on a
levelling staff held at a point between two turning points, to determine the
elevation of that point, is known as intermediate sight.
both the foresight and back sight are taken during the operation of levelling
is called change point. k) Intermediate Sight (IS) :
The foresight taken on a
levelling staff held at a point between two turning points, to determine the
elevation of that point, is known as intermediate sight.
It may be noted that for one setting of a
level, there will be only one back sight and one foresight but there can be any
number of intermediate sights.
level, there will be only one back sight and one foresight but there can be any
number of intermediate sights.
Type of Levelling Equipments:
i) Dumpy level
ii) Tilting level
iii) Automatic level
iv) Digital Auto level
i) Dumpy level
ii) Tilting level
iii) Automatic level
iv) Digital Auto level
Dumpy level : It is simple compact and
stable. The telescope is rigidly fixed to its support therefore cannot be
rotated about its longitudinal axis. A long bubble tube is attached to
the top of telescope. Dumpy literally means short and thick.
stable. The telescope is rigidly fixed to its support therefore cannot be
rotated about its longitudinal axis. A long bubble tube is attached to
the top of telescope. Dumpy literally means short and thick.
Tilting level : It consists of a telescope attached
with a level tube which can be tilted within few degrees in vertical plane by a
tilting screw. The main peculiarity of this level is that the vertical axis
need not be truly vertical, since the line of collimation is not perpendicular
to it. The line of collimation, is, however, made horizontal for each
pointing of telescope by means of tilting screw. It is mainly designed
for precise levelling work.
with a level tube which can be tilted within few degrees in vertical plane by a
tilting screw. The main peculiarity of this level is that the vertical axis
need not be truly vertical, since the line of collimation is not perpendicular
to it. The line of collimation, is, however, made horizontal for each
pointing of telescope by means of tilting screw. It is mainly designed
for precise levelling work.
The Automatic level : Also termed as self aligning level. The fundamental
difference between automatic and the classic spirit level is that in the former
the line of sight is no longer levelled manually using a tubular spirit level,
but is levelled automatically within a certain tilt range. This is
achieved by compensator in the telescope.
difference between automatic and the classic spirit level is that in the former
the line of sight is no longer levelled manually using a tubular spirit level,
but is levelled automatically within a certain tilt range. This is
achieved by compensator in the telescope.
DUMPY LEVEL
It is simple compact and stable. The
telescope is rigidly fixed to its support therefore cannot be rotated about its
longitudinal axis. A long bubble tube is attached to the top of
telescope. Dumpy literally means short and thick.
telescope is rigidly fixed to its support therefore cannot be rotated about its
longitudinal axis. A long bubble tube is attached to the top of
telescope. Dumpy literally means short and thick.
Fig 9.1 Dumpy level
Fig 9.2 Parts of Dumpy level
The different parts of levelling
instrument are,
instrument are,
(a)Telescope
(b) Eye-piece
(c) focussing knob
(d) level tube
(e) cross bubble
(f) foot screws
(g) levelling head
(h) diaphragm
(i) ray shade
Basic components of level :
1. Telescope – to provide
a line of sight
2. Level Tube – to make line
of sight horizontal
3. Levelling head – to bring
the bubble of tube level at the centre of its run.
4. Tripod – to support the
above three parts of the level.
1. Telescope – to provide
a line of sight
2. Level Tube – to make line
of sight horizontal
3. Levelling head – to bring
the bubble of tube level at the centre of its run.
4. Tripod – to support the
above three parts of the level.
TELESCOPE : Telescope is an optical instrument used for magnifying and
viewing the images of distant objects. It consists of two lenses.
The lens fitted near the eye is called the eye piece and the other fitted at
the end near to the object is called the objective lens. The objective provides
a real inverted image infront of the eye piece at a distance lesser than its
focal distance.
Two essential conditions are
involved. :
i) The real image of
the object, must be formed.
ii) the plane of image must
coincide with that of cross hairs.
Focusing of Telescope :
The operation of obtaining a clear image of the object in the plane of cross
hairs is known as focusing.
viewing the images of distant objects. It consists of two lenses.
The lens fitted near the eye is called the eye piece and the other fitted at
the end near to the object is called the objective lens. The objective provides
a real inverted image infront of the eye piece at a distance lesser than its
focal distance.
Two essential conditions are
involved. :
i) The real image of
the object, must be formed.
ii) the plane of image must
coincide with that of cross hairs.
Focusing of Telescope :
The operation of obtaining a clear image of the object in the plane of cross
hairs is known as focusing.
1. Diaphram : A frame carrying cross
hairs usually made of either silk thread or platinum wire and placed at the
plane at which vertical image of the object is formed by the objective.
Vertical hair of the diaphram enables the surveyor to check the verticality of
levelling staff whereas horizontal hairs are used to read the staff
graduations.
2. Level Tube : Also
known as Bubble Tube consists of a glass tube placed in a brass tube
which is sealed with plaster of paris. The whole of the interior surface
or the upper half is accurately ground so that its longitudinal section, is an
arc of a circle. Level tube is filled with either or alcohol, the remaining
space is occupied by an air bubble. The centre of air bubble always rest
at the highest point of the tube. Outer surface of the bubble tube is graduated
in both the directions from the centre. The line tangential to the circular are
at its highest point i.e. the middle of tube is called the axis of bubble
tube. When the bubble is central the axis of bubble becomes Horizontal.
The level tube is attached on the top of Telescope by means of capstan headed
nuts.
hairs usually made of either silk thread or platinum wire and placed at the
plane at which vertical image of the object is formed by the objective.
Vertical hair of the diaphram enables the surveyor to check the verticality of
levelling staff whereas horizontal hairs are used to read the staff
graduations.
2. Level Tube : Also
known as Bubble Tube consists of a glass tube placed in a brass tube
which is sealed with plaster of paris. The whole of the interior surface
or the upper half is accurately ground so that its longitudinal section, is an
arc of a circle. Level tube is filled with either or alcohol, the remaining
space is occupied by an air bubble. The centre of air bubble always rest
at the highest point of the tube. Outer surface of the bubble tube is graduated
in both the directions from the centre. The line tangential to the circular are
at its highest point i.e. the middle of tube is called the axis of bubble
tube. When the bubble is central the axis of bubble becomes Horizontal.
The level tube is attached on the top of Telescope by means of capstan headed
nuts.
3. Levelling head : Levelling head
generally consists of two parallel plates with 3 foot screws. Upper plate
is known as Tribrach and lower plate is trivet which can be screwed on to the
tripod. Levelling head has to perform three distinct functions :
i) to support the
telescope
ii) to attach the level to
the tripod
iii) to provide a means for
level (foot screws)
generally consists of two parallel plates with 3 foot screws. Upper plate
is known as Tribrach and lower plate is trivet which can be screwed on to the
tripod. Levelling head has to perform three distinct functions :
i) to support the
telescope
ii) to attach the level to
the tripod
iii) to provide a means for
level (foot screws)
Adjustments of level :
(i) Temporarily
Adjustments – adjustments which
are made for every setting of a level.
(ii) Permanent adjustments-
required if some error is there in instrument.
(i) Temporary Adjustments : includes
a) setting up the level
b) levelling up
c) elimination of parallax
(i) Temporarily
Adjustments – adjustments which
are made for every setting of a level.
(ii) Permanent adjustments-
required if some error is there in instrument.
(i) Temporary Adjustments : includes
a) setting up the level
b) levelling up
c) elimination of parallax
a) Setting up the level : This
operation includes fixing the instrument on the tripod and also approximate
levelling by leg adjustment.
operation includes fixing the instrument on the tripod and also approximate
levelling by leg adjustment.
b) Levelling up : Accurate levelling
is done with the help of foot screws and by using plate levels. The
object of levelling up the instrument is to make its vertical axis truly
vertical.
is done with the help of foot screws and by using plate levels. The
object of levelling up the instrument is to make its vertical axis truly
vertical.
c) Elimination of parallax : If the
image formed by the objective does not lie in the plane of the cross
hairs, there will be a shift in the image due to shift of the eye.
Such displacement of image is termed as parallax. Parallax is removed in
two stages.
1) Focusing the eye for
distinct vision of cross hairs.
2) Focusing the
objective so that image is formed in the plane of cross hairs.
image formed by the objective does not lie in the plane of the cross
hairs, there will be a shift in the image due to shift of the eye.
Such displacement of image is termed as parallax. Parallax is removed in
two stages.
1) Focusing the eye for
distinct vision of cross hairs.
2) Focusing the
objective so that image is formed in the plane of cross hairs.
Levelling staff
It is an important accessory used with
levelling instrument at the time of conducting levelling survey. Reading
is taken on the levelling staff held properly at the point concerned by viewing
through the telescope of the levelling instrument. Usually 4 m levelling
staff may be used of folding type or telescopic type. Aluminium levelling
staff foldable at every metre length has also came to the market. The
levelling staff consists of three pieces. The topmost one slides into the
middle one and the middle portion slides into the bottom one. When the
staff is fully pulled, it will read exactly 40 decimeters (4m) from the bottom
shoe.
levelling instrument at the time of conducting levelling survey. Reading
is taken on the levelling staff held properly at the point concerned by viewing
through the telescope of the levelling instrument. Usually 4 m levelling
staff may be used of folding type or telescopic type. Aluminium levelling
staff foldable at every metre length has also came to the market. The
levelling staff consists of three pieces. The topmost one slides into the
middle one and the middle portion slides into the bottom one. When the
staff is fully pulled, it will read exactly 40 decimeters (4m) from the bottom
shoe.
Graduation in levelling staff:
·
Every
metre length is divided into 200 divisions.
Every
metre length is divided into 200 divisions.
·
The
divisions are painted in black and white alternately of thickness 5 mm each.
The
divisions are painted in black and white alternately of thickness 5 mm each.
·
The
graduation figures are marked at every decimeter length.
The
graduation figures are marked at every decimeter length.
·
The
number indicating metre is in red and the decimeter number is in black.
The
number indicating metre is in red and the decimeter number is in black.
·
Thus,
a graduation figure of 24 indicates 2 metres and 4 decimeters.
Thus,
a graduation figure of 24 indicates 2 metres and 4 decimeters.
·
The
graduation are made continuously one above the other in the same line.
The
graduation are made continuously one above the other in the same line.
·
The
division lines should be parallel to the base of the bottom shoe and
perpendicular to the length of the staff.
The
division lines should be parallel to the base of the bottom shoe and
perpendicular to the length of the staff.
·
The
edges of the division lines should be straight sharply defined.
The
edges of the division lines should be straight sharply defined.
·
They
should be clear and made distinctly visible by properly contrasting.
They
should be clear and made distinctly visible by properly contrasting.
·
The
graduation colour paints used should not crack or blister when exposed to
adverse or atmospheric conditions.
The
graduation colour paints used should not crack or blister when exposed to
adverse or atmospheric conditions.
google-site-verification=2j8Us0psP3GGjD12h0fH6_Z08_sRyWQjNbWcaMV4E9A